We only print on premium outdoor vinyl. Our wraps are digitally printed, and then UV laminated for extra durability. Adhesive backing adheres to your boards with Air release technology for easy installation. All wraps are laminated for UV protection.
The print sizes are 24"x 48".
2 Wraps are included in the set, so a quantity of 1 will equal 1 set of prints for 2 boards.
INSTALLATION TIPS
We suggest you begin with a smooth, dry dust free board. Fill any large dents or holes on the top and sand smooth. Painting or sealing your boards will help prevent moisture absorption and warping. Use a smooth foam roller or a foam brush to paint the top to create a smooth finish. Using water based paints and sealers instead of oil based make it easier to clean up and sealers do not not yellow over time. Outdoor semi gloss paint gives the best durability and adhesion. Let your boards cure for a minimum of 48 hours before applying the wrap. (We suggest longer to make sure the paint has outgassed) Inspect the top surface for any imperfections and smooth if needed. Our premium wrap film is designed to be installed dry and has a built-in air-egress technology to release air for an easy bubble free application. Never use any type of wet application.